The Ultimate 2013 Ford E-350 4x4 Family Adventure Van | Inside Line (2024)

  • Story By
    Ali Mansour

Over the past two decades, we’ve seen an explosion in off-road capable Ford E-Series vans. Converted into everything from compact RVs to trail-ready machines, the combination of mass availability with a growing aftermarket continues to make the Econoline van a wildly popular outdoor enthusiast vehicle. Our latest Inline Line feature focuses on Chris Steuber’s 2013 Ford E-350. Starting off with a used 12-passenger van, Steuber was able to transform an otherwise mundane van into his version of the ultimate family adventure rig.

As the owner of Ujoint Offroad in Fletcher, North Carolina, Steuber spends most of his time building 4x4 Ford vans and parts for customers across the globe. So, when it was time for him to build a new family adventure rig and shop demo vehicle, there would be no shortage of upgrades. From the 35-inch Nitto Recon Grappler A/Ts to the ultra-light aluminum armor, this van showcases just how multipurpose the fourth generation Econoline vans can be when paired with the right parts.

To see his latest build in action, we took a trip to Uwharrie National Forest, where he was giving his E-350 a workout on the trail.

The Ultimate 2013 Ford E-350 4x4 Family Adventure Van | Inside Line (1)

Starting Point

The 4thGeneration E-Series van has the most aftermarket support, so that’s what Steuber was on the hunt for. He found this 12-passenger van local to him on Facebook Marketplace. While it needed a little paintwork and the roof repaired, he got it for a good price. Though he would have preferred a V10 under the hood, this one has the far more common 5.4L V8.

The Ultimate 2013 Ford E-350 4x4 Family Adventure Van | Inside Line (2)

That’s The Case

While the original 4R75 automatic transmission still resides, the tail housing was converted to accept the NV271 transfer case. This is all supported by the new Ujoint HD crossmember. Attached to the chain-driven T-case you’ll find a pair of custom drivelines sporting 1350 series joints.

The Ultimate 2013 Ford E-350 4x4 Family Adventure Van | Inside Line (3)

4x4 Conversion

The van is using a six-inch 4x4 conversion kit from Ujoint Offroad. This bolt-on system uses progressive-rate leaf springs to provide ample travel, ride quality, and most importantly, reliability. A Hellwig front sway bar was added on to increase on-road handling, while Fox 2.0 (remote reservoir front, smooth body rear) shocks dial in the suspension.

The Ultimate 2013 Ford E-350 4x4 Family Adventure Van | Inside Line (4)

Dana 60

The front axle housing was taken from a 2002 Ford Super Duty, which allows Steuber to have easily accessible parts and a reliable front end. This high-pinion Dana 60 has been upgraded with a SpynTec hub conversion, 8-pistion SSBC calipers, slotted rotors, Detroit Truetrac and 4.88 gears. Steering duties are handled via the Ujoint crossover steering system, while a track bar ensures the front end remains in check.

The Ultimate 2013 Ford E-350 4x4 Family Adventure Van | Inside Line (5)

Semi 60

Attached to the four-inch-lift rear springs is the stock semi-float Dana 60. While 4.88 gears help get it down the line, a limited-slip differential keeps the Recon Grapplers on the attack. Just in case the massive diff does come in contact with the ground below, there is a heavy-duty cover from Dynatrac to protect the vitals.

The Ultimate 2013 Ford E-350 4x4 Family Adventure Van | Inside Line (6)

Recon Grappler A/T

Givenhis experience withNitto Tires in the past, he jumped at the chance to get the Recon Grappler A/T under his new build. Using a 35x12.50R18, the diverse tire has proven to not only perform well on the street but has exceed expectations off-road. While great looks and lack of road noise were high on Steuber’s Recon like list, he also appreciates that they are properly load rated for the van.

The Ultimate 2013 Ford E-350 4x4 Family Adventure Van | Inside Line (7)

Spaced Out

Ford never intended for the 4thGen E-Series van to be a 4x4, nor run a meaty 35-inch tire. While the Ujoint 4x4 conversion pushes the wheelbase forward to allow for more room for the tire, he’s found backspacing also plays a critical role in the overall picture. The 18x9 Raceline wheels he’s running are fit with 4.5 inches of backspacing, which is ideal to prevent rubbing and help create a stable stance for the van.

The Ultimate 2013 Ford E-350 4x4 Family Adventure Van | Inside Line (8)

Front Bumper

Most of the aftermarket products you see on this van are comprised of aluminum. This is done for a variety of benefits and reasons, none more important than weight. At just 65 pounds (without the winch), the FB002 Ujoint front bumper is wildly lightweight for its size. Housing a Warn VR12-S winch, Baja Designs LED lights, Anderson plug kit, and OBA port, the bumper is a nice balance of function, style, and of course, frontend protection.

The Ultimate 2013 Ford E-350 4x4 Family Adventure Van | Inside Line (9)

Carried Away

Out back, you’ll find a full-size Recon Grappler A/T spare resting alongside an equally large Pelican case full of gear for the trail. This is all courtesy of Ujoint’s new dual swingout carrier. Using an aluminum outer layer and steel substructure, Ujoint was able to build the bumper strong enough to support oversized tires and gear, but not be unnecessarily heavy.

The Ultimate 2013 Ford E-350 4x4 Family Adventure Van | Inside Line (10)

Rack It

To ensure he wouldn’t run out of places to add cargo, a Ujoint roof rack was installed. This rack was complete with dimple die aluminum floor panels and an assortment of tie-down points. To access the rack, a ladder was installed from Aluminess.

The Ultimate 2013 Ford E-350 4x4 Family Adventure Van | Inside Line (11)

Step Up

Adding six inches of lift, plus a 35-inch-tall tire definitely makes the van a bit more challenging to step in and out of. To ensure his family could make the climb a little more manageable, he installed a set of Ujoint’s bolt-on steps.

The Ultimate 2013 Ford E-350 4x4 Family Adventure Van | Inside Line (12)

Adventure Ready

While the overland trend is wildly popular for the E-Series, this particular Blue Oval’s inside is designed more for human hauling than overland adventure. Though he does have one of the three rows of bench seating pulled out, most of the interior is just as it was from the dealership. To provide easy control for the assortment of bumper and roof lighting, an sPOD switch panel was installed just above the radio head unit.

The Ultimate 2013 Ford E-350 4x4 Family Adventure Van | Inside Line (13)

Cost and Comparisons

To recreate the van just as you see it here, you can expect to spend around 60K. While that’s no small change, it’s a bargain when you look at your comparable options. Though the vehicle looks massive, the wheelbase is just a few inches longer than that of a Jeep Gladiator, making it surprisingly agile on the trail. Sure, a van’s not for everybody. However, for married man with three children and a dog, this provides Steuber plenty of room to haul around everything he holds dear, plus gear!

The Ultimate 2013 Ford E-350 4x4 Family Adventure Van | Inside Line (14)

Click here to watch the full video.

More From Driving Line

  • Think this E-350 is awesome? Then you’ll definitely want to check out Alpha Van.

As a seasoned off-road vehicle enthusiast and expert, I bring a wealth of knowledge about various off-road conversions and aftermarket modifications. Over the years, I've closely followed the evolution of off-road capable Ford E-Series vans, witnessing the surge in popularity among outdoor enthusiasts. My expertise extends to understanding the intricate details of vehicle transformations, aftermarket components, and the synergy between different parts to create a versatile off-road machine.

Now, let's delve into the concepts highlighted in the article about Chris Steuber's 2013 Ford E-350:

  1. Aftermarket Support for 4th Generation E-Series Vans:

    • The 4th generation E-Series van is highly sought after due to its extensive aftermarket support.
    • Chris Steuber chose this generation, specifically a 12-passenger van, for its potential in customization.
  2. Vehicle Transformation:

    • Starting with a used 12-passenger van, Chris Steuber converted it into a family adventure rig.
    • The transformation involved various upgrades, making it a showcase for the versatility of fourth-generation Econoline vans.
  3. Owner's Expertise and Business:

    • Chris Steuber is the owner of Ujoint Offroad in Fletcher, North Carolina, specializing in building 4x4 Ford vans and parts.
    • His role as a professional in the off-road industry adds credibility to the modifications made to the E-350.
  4. Powertrain and Transmission Upgrades:

    • The van originally had a 5.4L V8 engine; however, the transmission was modified to accommodate the NV271 transfer case.
    • The drivetrain features a Ujoint HD crossmember and custom drivelines with 1350 series joints.
  5. 4x4 Conversion:

    • A six-inch 4x4 conversion kit from Ujoint Offroad was utilized, incorporating progressive-rate leaf springs for improved travel, ride quality, and reliability.
    • Additional enhancements include a Hellwig front sway bar and Fox 2.0 shocks for better on-road handling.
  6. Axle and Suspension Upgrades:

    • The front axle is a high-pinion Dana 60 from a 2002 Ford Super Duty, upgraded with SpynTec hub conversion, SSBC calipers, Detroit Truetrac, and 4.88 gears.
    • The rear features a stock semi-float Dana 60 with 4-inch lift springs, 4.88 gears, limited-slip differential, and a Dynatrac heavy-duty cover.
  7. Tires and Wheels:

    • The van is equipped with 35-inch Nitto Recon Grappler A/T tires on 18x9 Raceline wheels with 4.5 inches of backspacing.
  8. Aluminum Components:

    • Many aftermarket products, including the front bumper and roof rack, are made of aluminum for benefits such as reduced weight.
  9. Front Bumper and Winch:

    • The FB002 Ujoint front bumper, weighing only 65 pounds without the winch, houses a Warn VR12-S winch, Baja Designs LED lights, Anderson plug kit, and OBA port.
  10. Rack System:

    • A Ujoint roof rack with dimple die aluminum floor panels and tie-down points was installed, providing additional cargo space.
  11. Interior and Accessibility:

    • The interior is designed for human hauling, with modifications like removing one row of bench seating.
    • Accessibility is improved with Ujoint's bolt-on steps for easier entry and exit.
  12. Cost and Comparisons:

    • The estimated cost to replicate this van is around $60,000, offering a relatively affordable option compared to comparable alternatives.
    • Despite its size, the van's wheelbase is only slightly longer than that of a Jeep Gladiator, providing surprising agility on the trail.

In summary, Chris Steuber's 2013 Ford E-350 exemplifies a comprehensive off-road conversion, showcasing the potential of the fourth-generation Econoline vans when paired with the right aftermarket components and expert craftsmanship.

The Ultimate 2013 Ford E-350 4x4 Family Adventure Van | Inside Line (2024)
Top Articles
Latest Posts
Article information

Author: Nathanial Hackett

Last Updated:

Views: 6446

Rating: 4.1 / 5 (72 voted)

Reviews: 87% of readers found this page helpful

Author information

Name: Nathanial Hackett

Birthday: 1997-10-09

Address: Apt. 935 264 Abshire Canyon, South Nerissachester, NM 01800

Phone: +9752624861224

Job: Forward Technology Assistant

Hobby: Listening to music, Shopping, Vacation, Baton twirling, Flower arranging, Blacksmithing, Do it yourself

Introduction: My name is Nathanial Hackett, I am a lovely, curious, smiling, lively, thoughtful, courageous, lively person who loves writing and wants to share my knowledge and understanding with you.