V69 threads have a diameter of 0.0115 inch and 70 tex. Whereas, V92 has a 0.0113 inch diameter and 90 tex. V69 uses 16-18 sized needles that can be used with domestic sewing machines and are cheap. V92, in contrast, is more expensive that needs 18-20 size needles and is compatible with industrial machines. Finally, V92 is for high tension projects while V69 is for outdoor but lower tension projects.
Still confused about v69 vs v92 thread? Do not worry. Read this article to figure out which of these two threads is the right one for you.
Table of Contents
V69 vs V92 Thread: Quick Comparison
It doesn’t matter if you compare between brother cs7000x vs cp100x or v69 vs v92, you always need some ground to compare. So, I will be covering a lot of details on both V69 and V92 threads. But first, here is a quick comparison of the two:
Criteria | V69 | V92 |
Applications | Sails, tents, boat covers, awnings, outdoor canvas covers and tarps. | Sails, tents, boat covers, awnings, outdoor canvas covers, marine and automotive upholstery, and tarps, marine lift slings, marine tie down |
Compatibility | Home sewing machines | Industrial sewing machines |
Ease of Usage | Comparatively easier to use | Comparatively hard to use |
Thread diameter (inch) | 0.0115 | 0.0133 |
Needle Size | 16 – 18 | 18 – 20 |
Tensile Strength(lbs) | 11.31 | 15.16 |
Tex | 70 | 90 |
Price (per 1500 yards) | $7.5 | $14 |
V69 vs V92 thread: In-Depth Comparison
![V69 vs V92 thread: All You Need to Know - Best Sew Machines (1) V69 vs V92 thread: All You Need to Know - Best Sew Machines (1)](https://i0.wp.com/bestsewmachines.com/wp-content/uploads/2023/03/V69-threads.jpeg)
Still confused about what are the major differences between V69 and V92 threads? Do not worry because I have got you covered. Here is a detailed comparison of the two:
Applications:
Both V69 threads and V92 threads can be used to make sails, tents, boat coverings, and outdoor canvas. V69 is a better choice for making junk sails as they are under low stress than other sails. They can also be used to make awnings and tarps.
Both V69 and V92 can be used for marine upholstery as they are both resistant to the harsh marine environment. V92 threads, unlike V69, can be used to make marine lift slings and marine tie downs as they are thicker. Both types of threads can be used in making decorative stitching on fabric.
Pro tip: Use solution dyed threads outdoors to avoid color fading. You could also use UV treated polyester threads for better results.
Compatibility:
V69 threads can be used with most domestic sewing machines along with industrial ones, while V92 threads usually require large industrial sewing machines.
However, when it comes to different thread categories, you need to know how much thread your class 15 and m bobbins can hold as well.
Ease of Usage:
V69 threads will be easier to use compared to V92 threads. This is because V69 threads are lighter than V92.
You can also use V69 threads with domestic sewing machines, making them much easier to work with. Using V92, on the other hand, usually requires you to use industrial sewing machines.
Thread Diameter:
V69 has a thread diameter of 0.0115 inch, while the V92 thread has a diameter of 0.0133 inch. This makes the V92 much thicker than the V69. For this reason, it’s difficult to use V92 with home sewing machines.
Tensile Strength:
The tensile strength of nylon V69 is 11.31 lbs while for nylon V92, the tensile strength is 15.16 lbs. On the other hand, polyester V69 has a tensile strength of 10.13 lbs while for V9, it is 13.48 lbs.
Tensile strength refers to the amount of weight a thread can hold without breaking. So the more the tensile strength of your thread, the less likely it will break. Thicker threads of the same material have more tensile strength than thinner threads.
Materials can also influence the tensile strength of a thread. Nylon is slightly stronger than polyester.
So if you are going to use the thread for a high tension application, use nylon V92 thread. If you are going to do a project where the threads will not be in much tension, use V69 threads.
However, threads can not be chosen only based on tensile strength. Polyester V92 threads are more popular than nylon V92 threads in sail making despite lower strength. This is because polyester has more resistance to shrinking and stretching.
Needle Size:
V69 threads require 16-18 sized needles, whereas V92 threads require 18-20 sized needles. If you use a smaller needle than the recommended size, you will face problems like thread breakage, needle bending and uneven stitching.
Using a bigger needle than recommended, on the other hand, can cause uneven stitching and weak stitches which can break over time. So always use the recommended needle size.
However, you’ll be surprised to know that you can even sew without a needle or thread.
Tex:
The tex of V69 is 70 while V92 has a tex of 90. Tex refers to the weight of a 1,000 meter thread in grams. V92, being the heavier thread, has a higher tex than V69. This directly influences the cost of the thread and ease of use. Both Nylon and Polyester threads have similar tex.
Price:
The average price of a spool of 1,500 yard V69 thread is $7.5, and for 1,500 yard V92, it is $14 on Amazon. Both nylon and polyester threads are similarly priced. The price of bonded nylon V92 thread can be as low as $10 and as high as $20 per 1,500 yards on Amazon. V69 thread is priced a maximum of $10 and minimum of $6 per 1,500 yards.
Which is Better: V69 vs V92 thread?
![V69 vs V92 thread: All You Need to Know - Best Sew Machines (2) V69 vs V92 thread: All You Need to Know - Best Sew Machines (2)](https://i0.wp.com/bestsewmachines.com/wp-content/uploads/2023/03/V69-and-V92-thread-1024x681.jpeg)
V92 thread is better than V69 thread in terms of making high tension projects, such as marine lift slings and marine tie downs. V69 threads are better than V92 in terms of ease of use and cost. V69 threads can also be used with smaller needles than V92 threads.
Frequently Asked Questions (FAQs):
What is bonded nylon?
Bonded nylon is nylon thread that has been treated with a special bonding agent. It has a 2, 3 or 4 ply construction. The plies do not come apart because of the bonding agent, making the thread very durable. Bonded nylon is mostly used for industrial sewing. Bonded nylon also has a smoother surface, making it resistant to friction when sewing.
What’s the strongest thread for sewing?
Kevlar is the strongest thread used for sewing. Kevlar is 5 times stronger than steel wire and 2.5 times stronger than nylon and polyester. Kevlar threads do not stretch or melt and decompose at 800 degrees fahrenheit. Kevlar thread is used in sewing leather, canvas, seat belts and air bags.
Which Fiber thread is strongest?
Ultra-high molecular weight polyethylene (UHMWPE) thread has the highest tensile strength among threads. For similar weight, UHMWPE thread has 10 times more tensile strength compared to steel wire. It has a strength of 3.5 GPa. It is used in medical sutures, fishing lines, blimps, footwear and body armor.
Conclusion
Now you know about v69 vs v92 thread. I hope that I have managed to answer all your questions about V69 and V92 threads. Now you understand which thread you need for your net project.
That is it for today. Goodbye and Goodluck on your project!
Helen Grant
Hello! My name is Helen Grant. I am glad to welcome you on my site about sewing. If you came here then you are probably interested in the sewing craft and everything connected with it.On my site you will find visual aids for sewing, subtleties and secrets.I worked as a seamstress for a long time and helped a lot of girls to master this profession in my footsteps. All who used my personal secrets, life hacks, now have an excellent reputation, have reached great heights and independently conduct master classes for beginners.If you are interested in the topic of sewing, sewing life hacks, as well as detailed analyzes of sewing machines and materials, then you are definitely in the right place!